In part 3 of this series, we installed the Self Hosted RHV Engine (RHV-M) on our baremetal1 server. This server is now a RHV Hypervisor with a single VM, however that VM has not yet been imported so cannot be seen from RHV-M.
Add Storage Domains
Our next step in the build process is to add our second Gluster volume (vmstore) for general VM storage. We do this from the RHV-M administration portal as the admin user.
In part 1 of this series we looked at the hardware configuration for the new lab, and installed the base OS via kickstart from Satellite. In part 2 we installed and configured Gluster to provide shared storage between the hosts. In this part we will look at installing Red Hat Virtualisation and performing the initial configuration.
Red Hat Virtualisation can be installed in a number of ways. For my usage, the ideal way would be to make use of Red Hat Hyperconverged Infrastructure (RHHI), which uses an installation method that provides a wizard to install and configure both Gluster and RHV. As I mentioned in part 2, this unfortunately wasn’t possible for me due to the architecture and version mismatch on my Raspberry Pi Gluster arbiter node.
Another method allows for RHV to be installed using pre-existing resources, which we now have. The RHV Manager (RHV-M) is the first component that needs to be installed, and there are two methods to do this as well. The first is to have the manager on a dedicated host, the second is to have the manager ‘self-hosted’. Self Hosted means that the RHV-M server is hosted as a guest on a RHV hypervisor, in a similar way that VMWare operate their vCenter Appliance (VCA). I am going to be using the Self-Hosted option, using the RHV 4.1 Self Hosted Engine guide.
In part 1 of this series we looked at the hardware configuration for the new lab, and installed the base OS via kickstart from Satellite. In this part we will look at how to solve the issue of presenting a shared storage domin from individual servers.
If you remember back from part 1, our new setup looks like this:
I use my home lab setup extensively for testing and developing solutions for clients, as well as learning various aspects of installing and operating products within the Red Hat portfolio. My lab hardware also hosts a handful of ‘production’ VMs that provide services such as DNS and authentication to the rest of the house.
The basic setup was two servers, both installed with Red Hat Enterprise Linux (RHEL) and local storage, using libvirt KVM to host several virtual machines per host. A single 802.1q trunk carried multiple VLANs to separate ‘core’ network traffic from two ‘lab’ networks, one of which is configured via firewall rules on the router to have no connectivity to the outside world, simulating an air-gapped disconnected environment.